05/26/2026
*****update. Well took it apart tonight. Tore the splines out of the drive plate.*****
Well this post has less to do with photography and more to with help from the race community. I'm using my photography page as i can post this to multiple grounds in one shot. I have a quick change with Coleman sportsman hubs. The left tube is slightly bend. I tried to straighten it to no avail. So I put some new seals in the hubs cleaned and greased the bearing and sent it. Well apparently that was the wrong answer. I know some thing in the left rear is broke as the wheel turns when in park,. It has a spool so nothing should turn in park. I suspect the axle snapped. My question is do i need to replace the tube? Or is there a way to put cambered drive plates on? I'm almost guessing to use cambered drive plates i would need new hubs. But what I don't know is if 5x5 hubs will fit on the same snout that wide 5's use. These hubs use wide 5 bearing and seals. I would live to just slap wide 5's on and be done, but i think it would look dumb with wide 5's on the rear and 5x4.75's on the front. Let me know what you guys think
