Coatwolf Productions

Coatwolf Productions Stay up to date on all of Coatwolf's activity here!!!

01/28/2021

Congratulations to Patreon drawing winner and to Instagram drawing winner !!! 🥳😁🔥

Thank you so much to everyone who participated in this giveaway. We wanted it to be fun & to be able to share a special product. Stay tuned for more exciting giveaways planned for the future from us here at Coatwolf!

And don't worry about 😘 He's also a very close personal friend of ours who worked on the design of the giveaway. He said to give it to the next drawing after him. We will certainly make sure he gets something cool!

💥INSTAGRAM & PATREON GIVEAWAY💥Doing our first give-away! This is a prototype/limited run of the first Coatwolf Edition 1...
01/19/2021

💥INSTAGRAM & PATREON GIVEAWAY💥
Doing our first give-away! This is a prototype/limited run of the first Coatwolf Edition 12” LP “Bellflower” Soundtrack by Jonathan Keevil. 3 total, they are all signed by Evan and Jonathan.
One is being raffled off here, one on our Patreon.com/Coatwolf, and one is going on display at Coatwolf HQ.
To enter you must be one of our Patrons on Patreon, or head over to the Coatwolf Instagram or Evan's Instagram. We are not going to be fetching data from Facebook posts/shares/stories!
Rules:
•Be following &
•tag two friends in the comments (ideally who you think would like our films)
•tag up to 10 friends for additional entries
•Entries open until Tuesday 1/26
For extra entry:
•Repost this post and tag us
Hopefully this is fun for everyone, we wanted to make something special if we were gonna try this “give-away” thing.
If this one goes well, we are doing a much bigger, and honestly insane one next.
Again we’re getting ready to release our second film finally, and hoping to get more eyes here to help get the word out as we start promoting.
More details: the vinyl itself is a re-labeled/re-purposed original Oscilloscope release. The rest 100% made here at the Coatwolf workshop. The metal pieces are all brass (machined and engraved here). Includes a Medusa Chainsaw necklace and a very special gold Medusa car pin (we normally only give these out here at the shop, they’re not for sale). Design is by , with help from who did the Medusa car artwork that is engraved on the lid. Evan's brother Wyatt designed the new label and all the text for the engravings.
Cheers everyone, hope your having a happy Tuesday!

🤔🔥 Confused about where to buy an official theatrical one sheet poster of Bellflower? We've had many questions on this s...
01/12/2021

🤔🔥 Confused about where to buy an official theatrical one sheet poster of Bellflower? We've had many questions on this so here's the deal... Oscilloscope, the distributer of the film, has the poster (and Bellflower DVD, amongst other amazing movies they've distributed) for sale on their website. Cruise over to https://store.oscilloscope.net/products/bellflower-poster?_pos=4&_sid=e47f6dfad&_ss=r to snag yours for $19

🔥The Medusa Car framed photo in our lobby has a new fun holiday friend! A short time ago our very own taught a remote c...
12/24/2020

🔥The Medusa Car framed photo in our lobby has a new fun holiday friend! A short time ago our very own taught a remote class to students at Olympic College in Bremerton, WA. A big thank you to & for the delightful card and encouraging words!

😁 Josh is one of our patrons and opted for us to send him a kit to assemble his own instead of taking one of ours, which...
12/16/2020

😁 Josh is one of our patrons and opted for us to send him a kit to assemble his own instead of taking one of ours, which we sell in our shop & are also given to patrons who opt into certain tiers. Sharing his Facebook post... He also wrote in the email that he had a better appreciation for the time it takes to put together. Jet got a kick out of that, since she is the assembler!
"About a month back the fine folks at Coatwolf Productions sent their Patreon backers chainsaw necklaces. I had mine from years back and Jet was wonderful enough to send me the hardware and 3D printing files to make a case for my old chainsaw.

Nerd stuff: The case they sent out was 3D printed on an FDM machine and I decided to try printing the case on my SLA machine. I actually ended up having to sand my print a whole lot to get it square and mostly clean. The screw holes were a whole other problem since I hollowed out the model to use less resin. That was dumb since I forgot drain holes and I ended up with a bunch of uncured liquid resin inside the model. Since it’s a translucent resin I could cure the liquid pretty easy in the sun. This made some of the hardware holes a little small so I ended up having to drill them out to get the screws to fit."

Pictured is a unique custom Medusa Chainsaw Necklace display box which 3D printed himself 😁 Josh is one of our patrons ...
12/16/2020

Pictured is a unique custom Medusa Chainsaw Necklace display box which 3D printed himself 😁 Josh is one of our patrons and opted for us to send him a kit to assemble his own instead of taking one of ours, which we sell in our shop & are also given to patrons who opt into certain tiers. Sharing his Facebook post... He also wrote in the email that he had a better appreciation for the time it takes to put together. Jet got a kick out of that, since she is the assembler!
"About a month back the fine folks at Coatwolf Productions sent their Patreon backers chainsaw necklaces. I had mine from years back and Jet was wonderful enough to send me the hardware and 3D printing files to make a case for my old chainsaw.

Nerd stuff: The case they sent out was 3D printed on an FDM machine and I decided to try printing the case on my SLA machine. I actually ended up having to sand my print a whole lot to get it square and mostly clean. The screw holes were a whole other problem since I hollowed out the model to use less resin. That was dumb since I forgot drain holes and I ended up with a bunch of uncured liquid resin inside the model. Since it’s a translucent resin I could cure the liquid pretty easy in the sun. This made some of the hardware holes a little small so I ended up having to drill them out to get the screws to fit."

Jet and Jack sitting at our newly constructed 3D printing tower 🥳 Our Patreon peeps saw this info first! We're prepping ...
10/14/2020

Jet and Jack sitting at our newly constructed 3D printing tower 🥳 Our Patreon peeps saw this info first! We're prepping a lot of new projects simultaneously that are a part of a bigger plan, and this new print farm/tower will be used for doing in-house small batch manufacturing. An acrylic front and heating system is currently being installed. A lot of work from Evan, Ben, and Davis went into this, with support from the rest of the team.

10/14/2020

Stoked to help out with this project!!

🔥🔥 Already have a Medusa Chainsaw but want to add the display case? Say no more! Visit our online store at www.coatwolf....
08/27/2020

🔥🔥 Already have a Medusa Chainsaw but want to add the display case? Say no more! Visit our online store at www.coatwolf.com to snag yours 🔥🔥

Address

Ventura, CA
93001

Website

Alerts

Be the first to know and let us send you an email when Coatwolf Productions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share